Menu

03 December 2018

LEGO® Creator Expert 10264 Corner Garage: the new parts

Posted by Elspeth De Montes
The anticipation surrounding the next modular building always starts to build in November until the big reveal.  Read on to find out more about the next LEGO® Creator Expert modular building, 10264 Corner Garage, as we look under the hood to find new elements.

10264 Corner Garage is rated for Ages 16+ and has 2,569 pieces, including six minifigures: gas station owner, mechanic, vet, woman, man and a girl, plus bunny, parrot, dog, frog and fish figures.

The model is a three-storey building styled as a 1950s gas station at ground level, an animal clinic on the first floor, a well-equipped apartment on the second floor and finally a rooftop terrace.

On opening the box there is one 230 page instruction booklet, a Brick Yellow [TLG]/ Tan [BL] 32x32 Baseplate (Element ID 4558611), two loose Medium Stone Grey [TLG]/ Light Bluish Gray [BL] Plate 16x6 (Element ID 4211733 | Design ID 3027) and a lot of bags numbered 1-6... and NO STICKERS!

New Elements

There are two new elements with completely new moulds in the set. Here at New Elementary we had been calling this first element "Minecraft feet" as we noticed it in the 2019 Minecraft sets, so I was surprised when I noticed a Tile 2x2 with 1x2 Vertical Plate in Dark Stone Grey [TLG]/ Dark Bluish Gray [BL] (Element ID 6250018 | Design ID 41682) within Bag 1.


As you can see, the base of the element is a 2x2 tile while the position of the 1x2 portion is central, with two plate widths each side. It is used within Jo's Rescue Tow Truck and we will take a closer look at this in the next post.

EDIT - There is actually a second new element that slipped under my radar at first - thanks to all who pointed it out! White Turntable 2x2 Female (Element ID 6238334 | Design ID 27448) is a new mould that is not used in a particularly interesting nor essential way in this set but I think we will see more of this smaller turntable in sets with the new 'splat' gears that have been appearing in some of the 2019 set images.


Ground Floor

Now that the two completely new elements are out of the way, let's start at the bottom and take a look through the model. On the ground level there’s a 1950s-style gas station with fuel pump, kiosk and a vehicle workshop complete with a roll-up door, vehicle lift and tire mounter.


There are new decorated elements to be seen, firstly the Octan Gas sign on the pump.

There are two Flat Tile 2X2, Round 'Octan Gas' (Element ID 6254067) that are connected with a Ø3.2 Shaft W. Cored Knob (yes that really is the name of a LEGO element) to make the sign.

These are lovely printed tiles and complete the 'retro' pump perfectly.


The other printed element of note is the sign White 2x2 Tile 'Jo's Garage' (Element ID 6254086).


This is attached to a nice little sign built from Bright Yellow [TLG]/Yellow [BL] Plate 2X4X18° (Element ID 4260192 | Design ID 51739) and using Yellow Lamp Holder (Element ID 4632569 | Design ID 4081) as the method of attaching the two sides of the sign.

I love a wee touch of LEGO humour, so a vehicle repair business with the tag-line 'BY ACCIDENT WE MEET' is spot on.

Taking a closer look at the bucket beside the gas pump also reveals Black Minifigure Skate (Element ID 6253287 | Design ID 18754) used as a squeegee to clean windscreens. This is the first recolour for this skate as it has only ever been available in Silver Metallic before.


First Floor

On the first floor (or second floor for our US readers) there is an animal clinic that features an examination table, parrot perch, fish tank and a waiting area with sofa, armchair, table and flowerpot, plus the animal doctor’s desk lamp, microscope, mug, newspaper, envelope, scissors and syringe. There are a host of new elements to note here, with Dark Orange and Sand Blue featuring heavily.



The Sand Blue Windscreen Frame 2X6X2 (Element ID 6253475 | Design ID 13760) used to create the bay window is a new colour for this element. In addition,  Frame 1X2X3 (Element ID 6253441 | Design ID 60593) also appears for the first time in Sand Blue.


There is also a printed Transparent Glass for Frame 1X4X6 (Element ID 6257551) advertising Dr. Jones Animal Care, a nod to Indiana Jones I think.




 The SNOT area used to create the window complex above contains Plate 1X1, w/ 1.5 Plate 1X1, Downwards in Earth Blue [TLG]/Dark Blue [BL] (Element ID 6254479 | Design ID 36841) for the first time.

There is also a recolour used for the seating on this floor, White Brick 1X2, Outside Half Bow (Element ID 6248827 | Design ID 37352) joins the only other colour of this element at present, Medium Stone Grey. I'll say more about the seating it is used for in the next post.



 

Second Floor

The second floor apartment features a well-equipped kitchen with cookies baking in the oven, sink, pan, mug, salt and pepper, spoon and spatula, plus a sofa, bed, an old-fashioned TV, and a bathroom with toilet.
As you can see there are a lot of Dark Orange elements in the set which includes a new arrival, there are four Dark Orange Tile 2X2, Deg. 90, w/ deg. 45 cut (Element ID 6253425 | Design ID 27263) appearing for the first time in this colour. There is also a welcome return from abeyance other Dark Orange elements, including Plate 1x6 (Element ID 6253418 | Design ID 3666) last seen in 2011, Brick 1x6 (Element ID 6000743 | Design ID 3009) last seen in 2016 and Brick Corner 1X2X2 (Element ID 6253417 | Design ID 2357) last seen in 2005.

Looking at the front of both the first and second floors reveals Roof Tile 1X1, Deg. 45, w/o Knobs in Medium Stone Grey (Element ID 6253436 | Design ID 35464) for the first time. There are 80 of this element in the set so it is great to have so many of a new element in a single set.

Up on the Roof

The roof top terrace features a sun lounger, parasol and flower garden. From this angle you can just see the roof access, which I  thought was a new frame element but it turns out White Frame 3X4X3 Slanting (Element ID 4536519) is just not seen very often, it's in 12 sets including a previous modular.


The roof top's decorative façade also uses Dark Orange 1/4 Circle Tile 1X1 (Element ID 6228968 | Design ID 25269) and there is a healthy supply of this element also; 52 are included.

Minifigures

The six minifigures continue to have facial expressions rather than the simple smile of previous modular sets pre 10260 Downtown Diner

New Scooter

More importantly, you can now say ciao! to your friends as you ride the new Medium Azure Scooter (Element ID 6253483 | Design ID 15396).
 
The set itself measures over 12” (32cm) high, 10” (26cm) wide and 9” (25cm) deep and fits with the other modular buildings in the series, including 10243 Parisian Restaurant, 10255 Assembly Square and 10260 Downtown Diner. It will be available for purchase from 1st January 2019 at LEGO stores and LEGO.com priced US $199.99/ CA $269.99/ UK £159.99 /FR 189.99€*/ DK 1,499DKK/ AU 299.99.
*Euro pricing varies by country.


We will be taking a closer look at some of the building techniques found in the set in the next post.


Help New Elementary keep publishing articles like this. You can send an amount of your choosing via PayPal or card by click the image on the right. Think of it as the price of an app, or a book, or a yearly magazine subscription – whatever we're worth to you, we'd be honoured to receive it.



You can also help us by doing what you perhaps do already - buying from Amazon. Amazon USA: Amazon.com Canada: Amazon.ca UK: Amazon.co.uk Deutschland: Amazon.de
Products mentioned in this post were kindly supplied by the LEGO Group. All content represents the opinions of New Elementary authors and not the LEGO Group. All text and images are © New Elementary unless otherwise attributed.

33 comments:

  1. In the official image with all the new pieces, there's a white square piece that seems to be a 1x1 plate with hollow stud. Is it correct? Where is it used?
    Thanks a lot :)

    ReplyDelete
    Replies
    1. Don't you think that is a 1x1 bracket?

      Delete
    2. Yes, it could be, but I doubt it for two reasons:
      - all 4 corners are sharp - if you look at the new 1x1 bracket, two of the corners are rounded (there's the closeup image of the dark blue one above in the post)
      - I think that if it was a bracket, the photo would have included also the back part (as it does with the dbg one)

      Delete
    3. Via the brickset forums, it looks like a "turntable 2x2, female".

      https://forum.brickset.com/discussion/comment/603203/#Comment_603203

      Delete
    4. No. It is a 1x1 bracket inverted and it is not new (well they are relatively new but I mean not a new part). It is just a single dimension view ;-) Design ID 36840

      Delete
    5. The part that Neil linked to via Brickset is not in this set - I just double checked the instructions.

      Delete
    6. It can't be the 1x1 bracket in that photo. A 1x1 bracket has:
      2 rounded corners (as mentioned)
      The word "LEGO" inside the hollow stud
      An octagonal shape inside the hollow stud, rather than perfectly round.

      The mystery continues, I would say.

      Also, I'm surprised there was no mention of this in white:
      https://brickset.com/parts/design-37352

      Delete
    7. Brickset's review of the set features the turntable bottom piece, so it's curious that New Elementary's copy of the set somehow lacks it. How is the corner gas pump attached to the base in New Elementary's set if it lacks this turntable part?

      Delete
    8. Sorry for my confusion Neil 😔

      Delete
  2. What makes you say 1950's? The gas pump and tow truck have more of a 30's look to me.

    ReplyDelete
    Replies
    1. I just realized the 1950's bit came from Lego's description. Huh. The TV has more of a 30s/40s look, too.

      Delete
  3. "The Sand Blue Windscreen Frame 2X6X2 (Element ID 6253475 | Design ID 17454) used to create the bay window is a new colour for this element."

    I think you meant Design ID 13760 (not sure about the element ID).

    ReplyDelete
    Replies
    1. Thanks, I got the name right at least. I appreciate you letting me know and I have updated :-)

      Delete
    2. Thank you! Your blog is great

      Delete
  4. And the 2x2 with not standard hole?

    ReplyDelete
    Replies
    1. As above, I mistakenly thought the LEGO rendered image was a 1x1 inverted bracket. As others have correctly pointed out its a 2x2 turntable base and I will add it in shortly. Thanks :-)

      Delete
    2. It appears in a Friends 2019 set also

      Delete
    3. Yes that's right Oscar, it appears to have more functional use in Olivia's Cupcake Cafe too ;-)

      Delete
  5. More that 32 of the 1/4 circle tile in the set... more than that in front of box photo.

    ReplyDelete
  6. What is a 'splat gear'? Can you give an example? Thanks!

    ReplyDelete
    Replies
    1. You can see the "splat gears" on the reverse image of https://brickset.com/sets/41366-1 Specifically you can see a purple one sat on one of the new 2x2 turntables in that image.

      Delete
    2. https://brickset.com/parts/design-35442

      SPLAT!!

      Delete
  7. This comment has been removed by the author.

    ReplyDelete
  8. The 2x2 "T-tile" is awesome! So many new possibilities for SNOTwork without the half plate offset! A plate with the same "T-bar" on the underside would be great, too...

    ReplyDelete
    Replies
    1. I agree, it is a very exciting new element that New Elementary will be taking a closer look at soon!

      Delete
  9. It was in Joe's Garage, he played a stratocaster with a wammy bar🎶

    ReplyDelete
  10. What about 1x3 dark orange brick (3622)? Unfortunately, I haven't spotted them in this set. I'm waiting for it to finish my inventory for 10224 (Town Hall)...

    ReplyDelete
  11. LEGO call this new part the PLATE 1x2 W VERT TUBE. This implies that the 1x2 plate is the main family, with the tile (why called tube?) the add on.

    ReplyDelete
    Replies
    1. TLG are terrible at naming parts!
      Well I guess it does have a tube (The circle on the underside of the tile section) but it's doubly confusing to refer to the tube as vertical given that it points horizontally in this scenario!

      Delete
  12. I've finally just started building mine, and I have the impression that there are at least two different molds for the white 6538c - some of them are more straight when viewed in profile, and some are more curved. I used the ejection pips to try to orient them all the same way, and there were definitely variations.

    ReplyDelete