Loftus? Lofty? There's a joke there somewhere. Anyway, today we take a look at LEGO® City 60409 Yellow Mobile Construction Crane. Confusingly, it's anything but LEGO yellow. Instead, it sports a bright light orange colour scheme and brings with it a host of recolours, new moulds and prints.
Products in this article were gifted by The LEGO Group; the author's opinions are their own.
This article contains affiliate links to LEGO.com; we may get a small commission if you purchase.
60409 Yellow Mobile Construction Crane
US$109.99/ £94.99/ 109.99€/ AU$179.99
1116 parts
Release Date: 1 June 2024 / 1 August (US)
Set 60409 on LEGO.com
The parts
There are two new moulds in the set, both of which are currently exclusive.
Crane Section 3 x 8 x 4 with 6 Pin Holes (LEGO part 3777)
The first is this snazzy 3 x 8 x 4 Crane Section (6468170 | 3777). Five are included and together form the slick outer shell of the crane's boom.
With the help of some SNOT bricks, four segments form a satisfying '+' shape. Better still, the outermost Technic holes end up being 2 modules apart; perfect for 45° building possibilities.
Tile, Modified 2 x 8 with Catchers on Underside for Gear Worm Screw 6L (LEGO Part 3776)
The second new mould is a welcome addition to the worm gear family that Toby discussed in 2023.
A sneak peek at the completed model is the best way to demonstrate how the new plate interacts with the worm gear.
That's just the intended function of the plate though. Now for the left-field part analysis you're here for:
Its chamfered edges prevent a worm gear snagging as it traverses one plate to the next. They also allow two plates to sit neatly in a 90° corner, just like these hinge bricks. It's a pretty useless arrangement for mechanisms, but great for ornate stone walls or sci-fi detailing.
Our next element of interest would also work well for those...
Towball Hitching Plate 2x4 (LEGO part 3779)
Plate Special 2 x 4 with Ball Receptacle on Top in Medium Stone Grey/ Light Bluish Gray (6469207 | 3779) is the latest greeble in town. It's available in 3 other sets so far: 60440 Yellow Delivery Truck, 76966 Dinosaur Missions: Allosaurus Transport Truck and 60408 Car Transporter. The latter two do not release in the US until 1 August.
Hopefully it'll stick around and provide some much needed consistency to LEGO trailer hitch design. For more on this part, see Kev's wonderful analysis.
String, Cord Medium Thickness 200cm (LEGO part 101043)
The final new-ish 'element' of interest is a 2000mm length of high tensile, industrial grade, dark grey cable (6492336 | 101043). Which, on closer inspection, is actually just some string. Mind you, as string goes, it's very nice and a big improvement to the thread we used to get. It first appeared last year in 42146 Liebherr Crawler Crane LR 13000, which was reviewed by Toby.
It is the same length and of a similar thickness as the black string produced in LEGO MINDSTORMS sets in the early 2000s.
Recolours
Starting with the abundance of Bright Light Orange, this first batch are new for 2024 and appear in 2 other sets or less:
- 2 x Plate Special 2 x 2 with Horizontal T-Bar Underneath (6484950 | 5066) - New for June 2024, 2 other sets
- 2 x 1 x 2 Tile with Stud Notch - Left (6510125 | 5091) and Right (6510139 | 5092) - New for June 2024, also found in 60420 Construction Excavator
- 14 x Tile 1 x 8 with Groove (6490803 | 4162) - Exclusive
- 2 x Brick Curved, 3 x 1 with 1/3 Inverted Cut-out in (6490806 | 70681) - Exclusive
- 2 x Bracket 1 x 2 - 2 x 2 Inverted (6445339 | 99207) - 1 other 2023 set, 60380 Downtown.
- 18 x Tile Special 2 x 2 Corner with Cut Corner (6166896 | 27263) - 1 other set, 70354 Axl's Rumble Maker from 2017.
- 13 x Tile Special 2 x 2 Inverted (6132853 | 11203) - Found in 3 June 2024 sets, its only other appearance was 41179 Queen Dragon's Rescue from 2016.
- 4 x Slope 18° 2 x 1 x 2/3 with 4 Slots (6110043 | 61409) - 1 other set, 70227 King Crominus' Rescue from 2015.
- 4 x Tile 3 x 3 Curved, Macaroni (6453948 | 79393) - 4 other sets
- 4 x Panel 1 x 3 x 1 (6385484 | 23950) - 4 other sets
- 3 x Slope Curved 4 x 4 x 2/3 Triple Curved with 2 Studs (6178466 | 45677) - 5 other sets, last seen in 2018, also in 60420 Construction Excavator
- 1 x Windscreen 3 x 4 x 3 in Transparent/ Trans-Clear (6491972 | 84954) - Also found in 60420 Construction Excavator.
- 2 x Grille with 1 x 2 Plate, Racers Car in Dark Stone Grey / Dark Bluish Gray (4246898 | 50949) - Also found in 60420 Construction Excavator.
- 16 x Wheel 18 x 14 with Pin Hole, Fake Bolts and Shallow Spokes in Dark Stone Grey / Dark Bluish Gray (6490807 | 55981) - Exclusive.
- 2 x Plate Special 2 x 2 with Grills in Sand Blue (6405003 | 41862) Shockingly, this recolour only dates back to 2022. How was it not around in the early 2000s? It feels so Alpha team!
- 1 x Beam 1 x 2 with Ball Joint Holes in Ball in Green (6462446 | 67697) - Also found in 60420 Construction Excavator
- 1 x Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole in Bright Red/ Red (6390264 | 40147)
- 4 x Slope 45° 2 x 1 Double with Inside Stud Holder in Medium Nougat (6475291 | 3044)
Finally, here's a quick look at some of the useful 'itsy bitsy' elements in the set - the kind of parts that get snapped up the fastest during parts drafts. Note the 1 x 2 Tiles with 45° Stud Notches - Left (6510125) and Right (6510139). Despite only being introduced in March, they can be found in 13 sets already.
Prints
- 1 x Tile 2 x 4 with Robot World Roller-Coaster Park print in Bright Blue/ Blue (6480750) - A nice nod to fellow LEGO City set 60421 Robot World, this print wouldn't look out of place in a sci-fi workshop.
- 14 x Tile 1 x 1 with Red Danger Stripes print in White (6493199) - Plus x 2 spares.
- 2 x Tile 2 x 2 with Red Danger Stripes print in White (6480752) - Exclusive.
For a simple print, the 1x1 danger stripe (6493199) has surprising mileage for pattern-making. Surely there are some interior spaces that could handle a bold colour combo like this?
Minifigures
Four minifigures are included. The two Reddish Orange torsos with and without bib are new this wave - (6492292) and (6492300) respectively, as are the printed legs (6480747).
Frankly, the boss's lack of a high-vis jacket is a safety concern. Perhaps they stay away from the work site and the hat is just for show. If that is the case, communication could prove a challenge as there's only one walkie-talkie between them!
The completed model
Smart colour blocking and a whole heap of tiles create a clean looking model. It's packed with functions too – extending the outriggers, raising the boom and operating the hoist are all joyful actions to perform. The few stickers are easy to apply and blend well with the orange plastic.
Closing thoughts
READ MORE: LEGO® DREAMZzz™: all its new parts for August 2024
Help New Elementary keep publishing articles like this. Become a Patron!
A huge thank you to all our patrons for your support, especially our 'Vibrant Coral' tier: London AFOLs, Antonio Serra, Beyond the Brick, Huw Millington, Dave Schefcik, David and Breda Fennell, Gerald Lasser, Baixo LMmodels, Sue Ann Barber and Trevor Clark, Markus Rollbühler, Elspeth De Montes, Megan Lum, Andy Price, Chuck Hagenbuch, Jf, Wayne R. Tyler, Daniel Church, Lukas Kurth (StoneWars), Timo Luehnen, Chris Wight, Jonathan Breidert and our newest top-tier patron, Brick Owl! You folks are just the cutest little baby bows.
All text and images are © New Elementary unless otherwise attributed.
Nice review!
ReplyDeleteThe new new crane section is great. I fondly remember the old one and how it was used in the Exo-Force theme, but its shape was always somewhat clunky with how the Technic connections expanded its width. The new one seems much more streamlined while retaining useful connection points.
Yes! the Exo-force gateway definitely comes to mind when looking at these parts!
DeleteDoes this really have no steering ?
ReplyDeleteNo. Working steering for a model like this would probably be too complex for the typical age grade of the City theme, but I've seen some modifications online.
DeleteI wouldn't expect working steering, but a pivot point close to the centre like on the 2005 version would allow it to turn. I can see why a fixed chassis was used though. It does make the whole thing feel more stable.
DeleteRemoving and hauling the counterweights separately is how it's done in the real world, that seems fine to me.
ReplyDeleteAbsolutely. Even without a way to transport them, I'm fine that the set went the route it did. It's a perfectly reasonable solution. I just know kid me would be confused why this bit gets left behind when they all go home haha.
DeleteThe gear catcher plate can't be positioned four-to-a-gear, right? The long edges don't have the angle to allow for it, it looks like. Could probably sandwich two around one right, though?
ReplyDeleteIndeed, I wanted to check to see if three would work (even if they'd have to be offset) but that's a no-go. Two around the worm gear is the maximum.
DeleteOh wow, it's pretty much the Liebherr LTM 1750-9.1 from the axle arrangement to its silhouette. But figure-scale and jamppacked with amazing features. Certainly seems more of a bargain than the 1:50-scale model replicas of such cranes -- which, yes, I get it, toy vs display-only model is not a good comparison, but still.
ReplyDeletei always cringe a bit when AFOLs make little comments and complaints about the colors of Technic pins and axles; heaven forbid LEGO ever look like LEGO to adult fans of LEGO
ReplyDeleteI fumbled my wording there. Vast majority of the time, Colour-locked Technic doesn't bother me either. My intent was to note those parts are pretty much the only exception to the brilliant colour-blocking but a forgivable necessity of Lego-design.
DeleteOf course, the set contains a porta-potty. Even the flagship City sets need to maintain their potty humor!
ReplyDeleteBeyond just the humor of it, a port-a-potty is a pretty convenient thing for the crane to hoist—something "complete" that offers additional storytelling potential to the set, as opposed to something more partial and abstract like a girder or panel.
DeleteFantastic review. There's so much to be excited about in this set!
ReplyDeleteOrange is the New Yellow!
ReplyDeleteThe Keetorange Bonkles have been saying that for decades!
Delete*ALMOST 2 modules apart! My napkin math tells me the center of the two axle holes are actually 0.7*sqrt(2) modules, or 98.99% of a module - so close! So while, practically, the holes are easily able to be connected by a 2 module liftarm, the legality is questionable. I know TLG allows some room for error - consider the bridge in 71043 Hogwarts Castle, in which a far more significant geometry error (9% of a module) was allowed into the set, though its impact was distributed across a much larger, somewhat more flexible assembly. It's unclear which way the Lego courts would decide on the legality here, but I certainly am curious.
ReplyDeleteYou did the maths!! Thank you - this will help immensely with our case ;)
DeleteI had a nagging feeling it surely couldn't be *exactly* two modules. Thanks so much for your efforts, I'm so pleased you did the 'math maths' as its never been my area of expertise! I tend to stick to 'Lego-math' i.e. minimal calculations and a greater emphasis on trial and error haha.
Delete